My 'Star Wars Dark Side' has suddenly stopped booting up correctly and I cannot figure it out.
All the voltage rails are okay, the lights are all lit on the MPU6 and I have checked them with a meter;
24v, 13v, 5v, -12v, 3.3v, 1.5v
The display on the MPU6 alternates between;
MPU6 BOOT v3.7 and BCOS8.56 FPGA 8
There is a loud click from the speaker and then the messages rotate again.
Can anyone offer any advise on what could be the problem or things to try please?