Hi there folks, if you've been reading my little blogs about my new machine then you'll soon realise I know a little bit about machines but not a lot most of the time I have to guess what the problem is and work around the issues that are in-front of me. Take Teething problems day 2 issue. Had a little problem with colour change on the bottom monitor but didnt realsie how easy it would be to repair the problem so as I didnt know I thought about what little training I'd had on my 3 month training course at Bispham College which was too much paperwork on Health and safety and very little machine repair work. This is why I know a little but not a lot. So I spent almost 3 hours trying to sort out the monitor problem before giving up and going to bed frustrated at my lack of knowledge. I knew I was on the right track but the word is thought I was on the right track but new technology got In my way. There I said it the big T (Trouble) and the big P (problem) in the same sentence and not screaming at myself for getting into this sort of mess.
Now for all those who wish a fast forward button to skip to the end of my little rant about how much I'd learned about machine repair in three months. Then here goes you got your wish
Solution to the mega problem was staring me in the face when I pulled the lead out of the back of the bottom monitor I should have pulled the lead out of the pc part swapped the leads over as the top monitor as auto adjust on it and once the colour had gone back to normal swap the lead back Hey presto one fixed machine wow. Thanks Dave for the solution from Wessex coins for that.
The good thing here is that I've actually learned something new that two new things in 2 days wow I love my new machine.