When manufacturer's released flyers back in the day did they also release A4 size posters?
↧
Fruit machine posters
↧
Snakez n Ladderz Red Gaming ROM?
Hi does anyone have the above ROM for this machine? Stumbled across a reasonable image of the machine so would like to try a DX but can't see the ROM in the ROM.zip
Many thanks
↧
↧
Sr5i coin mesh problems
Hi every one, I’m new here and new to fruit machines so please take it easy on me.
I have a Barcrest Take it or Leave it MPU6 with SR5I coin mesh I have spoken to some people to get it update for the new £ 1 coin but every one I spoke to tells me that it can’t be done.
So I have looked around the site and found that if I update the coin mesh to a cashflow cf9524e all my problems will disappear however I can find one to buy but there are two cashflow CF9520e (GBFC0502) on ebay.
Can some one please tell me the difference from the CF9520e to CF9524e coin mesh and will it work on my machine.
Or if anyone knows where I can get a CF9524e coin mesh as I have tried e-service.co.uk and they don’t have any in stock and couldn’t tell me when they will be in.
Many Thanks
↧
Happy birthday Barcrest Junky
To our very own mod/long term member whom appears to hide his true age from the birthday listings
Happy birthday mate have a good day.
Happy birthday mate have a good day.
↧
Ouch! Toothache
No 1 most annoying common pain in my book. Anyone who knows me, will know the past few years, I seemed to have spent half my life at the dentist.
Just hoping I get a few hours sleep at least tonight, and am able to get an emergency appointment tomorrow morning, when I ring. Think I have another tooth infection and been here before and it's no fun, when you literally have about 10 minutes sleep, for 3 nights on the trot.
↧
↧
Empire Buckshot
Has a clone of this been emulated? Thanks
Attached Thumbnails
↧
Barcrest "Circle Skill" frustration
My vintage machine just won't play ball. I plug into the mains, lights up and that's it. No sound except hmmm. Coins and tokens just go straight through to tray. Rear panel open or closed no difference. Powered off and taken mpu3 out turned it on and no difference. Turned off and replaced mpu3 no difference. Any advice would be much appreciated! Cannot seem to get it to reboot, sanity needs to return ! Thanks everyone
↧
Tokens Anyone?
I got just over £60 worth of tokens, all the same deith leisure.
Open to reasonable offers.
Not got the plate for the mech just had no plate on machine.
Attached Thumbnails
↧
RAM resets on Club Spotted Dick
Hi, i was wondering if someone could help?
I am playing the recently released Club Spotted Dick on MFME.
Problem is, every time I close the program and reopen it, it resets the RAM.
I know this by checking the meters and the fact it will always have £4 in the bank when you start it.
Am I doing something wrong?
Thanks in advance for any help.
↧
↧
MFME 5 Disc reel issue
Working on a layout for Pay cheque & came across this when i'd made a disc reel for it, any idea what's causing it?
↧
37 Years of smoking!
I'm 51 years old (or young as I say it 
)
Yesterday I took the biggest plunge that I thought i'd never do....try!
Had the 1st of 12 1-2-1 meetings with 'Simon', a no smoking councillor
The meeting was scheduled for an hour, this went into 1h 15min's.....and so much was achieved I thought.
No pressure, no disrespecting me of a bad habit I have......
I went in thinking "why am I here?"....came out as "I know why" 
Yeah I appreciate this post is total bullshit to most, myself included after reading it prior to posting....but there we go...I just wanted to say something to someone/people close to my heart.
Going to a rough ride But i'll do it
Attached Thumbnails
↧
reset cashpot or set cashpot
does anyone know how to to do a couple of club emus ive i have play and its like on £12 and some deal or no deals 2
↧
Getting started DX'ing
Anyone got a few pointers to get me started? I know the basics of photoshop & the new MFME tools look easily to learn so would like to know how to start/lamping/masking etc.
↧
↧
Failed Test Machine
I think we've all heard of the phrase failed test machines. I was wondering what actually makes a fruit machine fail its test. For example, is it that the testers found an emptier? Or is it that the machine was just so boring that no one wanted to play it?
And does it get played in the wild, or is it just tested in the factory and the decision made there and then?
↧
Anyone know of a frontend like Hyperspin for MFME?
Hi all,
Two quick questions....
Does anyone know if there's a frontend for MFME like Hyperspin or something along those lines ?
Or even if Hyperspin would work?
Would be great to be able to pick which fruity to play from a selection and then 'escape' out of it at the end and pick another to play?
Also, what's the difference between MFME and Project Amber? They both look like they do the same thing on first glance?
I've not really looked into this in detail so these might be stupid questions but I haven't got long on the PC tonight so thought I'd ask.
Cheers :-)
↧
Triple 777 machines
Hi there folks as you may know from a couple of post on here I want to purchase a triple 777 machine with several gamer on but have seen one for sale but it doesn't have the games on it I want but if I bought the machine is there a site where you could download and copy to a usb stick the games like you could with the Rio enhanced or not?
At present the only machine I've seen has 5 games on it which are okay but a little old for my liking when I want Rocky freespins and other modern titles on there. So can someone suggest a site where you can download the games so you can play it on any triple 777 machine? I'd also like to know if you have some games how to upgrade them to the latest versions without too much expense?
↧
not exactly justice but a start...
http://www.itv.com/news/2017-05-15/moors-murderer-ian-brady-dead-at-age-79/
finally,the second half of one of crime`s sickest and most hated duo`s has kicked the bucket...may he rot in hell,he certainly got an easier death than any of his young victims..
↧
↧
betcom bank job
have we got any switchable roms for this not 100 of course as i know this goes to 5 pound as i played one years ago as it lasted a month
↧
Anyone know where to buy fruit machine buttons from?
I've seen a few on ebay but wondered if there was any proper shops for these things out there?
The ones on ebay seem really hit and miss quality-wise and what buttons are available.
When I built a MAME cabinet there were shops dedicated to just arcade controls but I've not found one selling fruit machine buttons?
Thanks for any help you can give me ::-)
↧
JPM Impact Sonic the Hedgehog Error 8.5 RAM Corruption HELP! Acting bizarre?
Hi everyone, I've been struggling to fix my 1997 JPM Sonic the hedgehog fruit machine, so any help would be much appreciated.
Had it for about 12 years now and played fine up until this point, £1 coin payout has never worked, but thats another issue.
When I switched it on error 8.5 displayed (RAM Corruption) according to the manual. Then it wouldn't power up, only alarmed. I opened the back door and altered some DIL switches and reset the RAM by holding the test button for 20 seconds as you power it up. Now here is the bizarre part.. An IOU code came up: 134225920 TO. I then reset it again and the error code is now gone and it displays like normal, but it just gets weirder.. Every spin now brings in the jackpot and I have no idea how to get this back to its normal self. The APEM switches are all the same and is at 80%, but with bringing the jackpot in all the time, its registering and showing the Actual % as about 200 at the moment in test mode.
I defiantly think the battery needs changing on the Processor board, I literally haven't done anything to the machine since I got it as knew nothing, but now its gone wrong I'm learning, gutted really as these machines are getting rarer due to lazy idiots like myself lol. But I'm not sure if this leakage would cause such a fault as just spinning in the jackpot all the time, seems to be stuck on some kind of mode :-/ I've attached some pics of the battery damage also.
Thanks!
Processor board:
Could be the coin mech problem: Loose wire..
↧